Please use this identifier to cite or link to this item: https://cris.library.msu.ac.zw//handle/11408/4787
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMkungunugwa, Tafadzwa-
dc.contributor.authorManhokwe, Shepherd-
dc.contributor.authorChawafambira, Armistice-
dc.contributor.authorShumba, Munyaradzi-
dc.date.accessioned2022-04-01T08:58:07Z-
dc.date.available2022-04-01T08:58:07Z-
dc.date.issued2021-
dc.identifier.issn2090-9063-
dc.identifier.issn2090-9071-
dc.identifier.urihttps://doi.org/10.1155/2021/5552224-
dc.identifier.urihttp://hdl.handle.net/11408/4787-
dc.description.abstractGlobally, a ninth of people use polluted water sources because an estimated 300–400 Mt of waste and 90% of sewage are discharged into water bodies from industries and developing countries, respectively. The utilisation of indigenous fruit pits in producing novel adsorbents will greatly benefit in wastewater treatment. In most underdeveloped countries, activated carbon (AC) is imported at a high cost. The study was aimed at synthesising and characterisation of AC obtained from Marula nutshell. Carbonization of organic matter from Marula nutshell was carried out at 200°C, 400°C, 500°C, and 600°C. Sulphuric (H2SO4) and phosphoric (H3PO4) acids were used as activating agents at concentrations of 20–60% (v/v). Physicochemical characteristics of the AC, such as bulk density, moisture, ash, pH, and iodine number, were analyzed using standard methods. Functional groups and total carbon content were determined using the FTIR spectroscopy and Nitrogen Carbon Sulphur (NCS) analyzer, respectively. The values of carbon yield and total carbon in activated samples with H2SO4 and H3PO4 were 32.2–93.2%, 26.9–95.8%, and 46–79%, 20.8–69.8%, respectively. The pH, ash, moisture, and bulk density of activated high carbon samples with H2SO4 ranged from 2.4–6.1, 0.65–3.49%, 1.3–8.4%, and 0.42–0.62 gcm−3, respectively. Activated high carbon samples with H3PO4 had 2.7–3.2, 11.3–29.8%, 4.7–14.6%, and 0.39–0.54 gcm−3 pH, ash, moisture, and bulk density, respectively. The synthesised AC samples with 40% H3PO4 at 500°C had the highest iodine value of 1075.7 mg/g. FTIR results showed the presence of aliphatic carboxylic acid salt, inorganic nitrate (NO3−), and phosphate groups in the synthesised AC and were not significantly different (p<0.05) from commercial AC. The untreated Marula nutshell had some aliphatic hydrocarbon (alkanes), inorganic phosphate (PO3-4), aliphatic ester (–COO), and aliphatic carboxylic acid salt (–C(=O)O–) groups. A novel adsorbent, AC was produced from Marula nutshell with the potential to be used in water treatment.en_US
dc.language.isoenen_US
dc.publisherHindawien_US
dc.relation.ispartofseriesJournal of Chemistry;-
dc.subjectPolluted water sourcesen_US
dc.titleSynthesis and characterisation of activated carbon obtained from marula (Sclerocarya birrea) nutshellen_US
dc.typeArticleen_US
item.cerifentitytypePublications-
item.fulltextWith Fulltext-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.languageiso639-1en-
item.openairetypeArticle-
item.grantfulltextopen-
Appears in Collections:Research Papers
Files in This Item:
File Description SizeFormat 
5552224.pdfFull Text1.37 MBAdobe PDFView/Open
Show simple item record

Page view(s)

92
checked on Nov 22, 2024

Download(s)

30
checked on Nov 22, 2024

Google ScholarTM

Check


Items in MSUIR are protected by copyright, with all rights reserved, unless otherwise indicated.